1) Display: 2.8 inch LCD with 3 color tone: Blue, Orange, and Grey, pixels:240 Vx960H
2) Back lighting: On/off White LED
3) Depth Capability: 328feet(100m)
4) Sonar Coverage: 60degrees beam angle in 83Khz/ 20 degrees beam angle in 200Khz
5) Power: 3.7 V rechargeable lithium battery
6) Waterproof design: level-4(spray-water-proof)
7) Water depth, water temperature level, fish place, bottom contour can be constantly gotten from the water
8) User selectable level of sensitivity, zoom, units, depth range, shallow alarm, fish icon, fish alarm, and chart speed setting
9) Built in memory stores finder setting when the fish finder is turned off
10) Operational Temperature: 14 ° F to 122 ° F (-10 ° C to 50 ° C) plan list
1. Fish Finder Display
2. cable Transducer
3. Removable Transducer Float with Rubber Stopper
4. Transducer Side-Scan Adapter
5. Stainless Bolt and Wing Nut
6. User Manual
1. the product do not include the plug.2.
make sure that the transducer touch the water for use properly.3.
for ice fishing, if you wish to identify the fish directly rather of digging a ice hole, There should be no air between the sensor and the ice layer; The system does seem to pick up some disturbance from the ice at the surface, so you need clean the drifting ices around the transducer for much better user experience.
Sonar Coverage: 60degrees beam angle in 83Khz/ 20 degrees beam angle in 200Khz
please note ? Don't test the fish finder in swimming pool,bathtub, bucket, fish tank, sink etc.
Water depth,water temperature, fish location, bottom contour can be constantly obtained from the water